358 Vintage Road Racer,page 7

The belly pan plug is almost ready for paint and wax >

This is the plug for the primary belt drive cover. Both pieces will be laid up with carbon fibre cloth >

Jumping ahead a bit here, these are the finished parts >

Using an electronic gram scale to help balance each flywheel. I use a long ground shaft resting on the wheel balancer, and a counterweight calculated to give a balance factor of 55% >

The flywheels are short stroke Sportster from Truett and Osborne. The (9) 1/2" holes are drilled about .875" deep >


Flashback Fabrications Inc.tel 604-888-8785email
PO Box 401Lynden WA98264

[ excelsior ][ other projects ] [ aermacchi nw ][ brodie bikes ][ paul brodie ][ site map ][ home ]
Copyright © 2006-2010 Paul Brodie. All Rights Reserved.